Sports / Mobile
Every QRIS transaction on staek88 carries a published limit range — minimum and maximum amounts that apply per transfer, per day, and per account tier. Before you move funds, check the current limit shown in your account dashboard so your deposit goes through without delay.
QRIS deposit limits on staek88 set the floor and ceiling for each scan-and-pay transaction you send. The minimum keeps micro-deposits within our processing window; the maximum reflects the cap that Bank Indonesia applies to QRIS merchant transactions at the national level.
The limit you see is not a single flat number — it is the result of several overlapping rules that apply simultaneously to your account and transaction. Understanding each factor helps you plan deposits without hitting a wall mid-session. Here is what drives the figure shown on your payment screen.
An account that has completed identity verification steps — name, ID document, and wallet matching — generally carries a higher per-transaction QRIS cap. The current state of your verification is shown in the Account Settings section after you log in. Completing each step is the straightforward path to a wider limit range.
QRIS transactions in Indonesia are governed by a national maximum set by Bank Indonesia. This applies universally across all merchants that accept QRIS, including staek88. We cannot override this ceiling, and we publish the applicable figure in the deposit flow so you see it before confirming any transfer amount.
Beyond the per-transaction ceiling, a daily rolling total limit applies to QRIS deposits on your account. Once your cumulative deposits within a calendar day reach that threshold, additional QRIS transfers are blocked until the window resets. The remaining daily allowance is visible on the deposit screen in real time.
When you fund a QRIS deposit via GoPay or LinkAja, the source wallet's own tier limit also applies. A basic GoPay wallet carries a lower monthly cap than a verified one. If your deposit is declined, checking your source wallet's tier in the GoPay or LinkAja app is the first diagnostic step before contacting staek88 support.
These four parameters define how the QRIS deposit limit behaves on your account. Values marked as account-dependent are shown in their current state inside your account dashboard after login — we do not publish a single universal figure here because the number varies by account tier and verification level.
The smallest single QRIS deposit accepted. The exact floor is shown on the deposit screen before you scan. Amounts below this floor are rejected at entry.
The ceiling per single scan-and-pay action. This reflects both the Bank Indonesia national QRIS merchant cap and your account tier. Verified accounts may carry a higher ceiling — check your current figure in the Deposit section.
The total QRIS deposit volume permitted within one calendar day on your account. The remaining allowance updates in real time on the payment screen. Once reached, QRIS deposits resume after the daily window resets.
QRIS deposits are available for Indonesia-based accounts where local law and eligible regions permit. Availability and applicable limits depend on your account's verified region and local regulatory conditions at the time of the transaction.
The QRIS deposit flow on staek88 is built for portrait use on a phone screen. When you open the Deposit section from the mobile menu, the limit range for your account appears as a labelled line directly above the amount entry field — minimum on the left, your current maximum on the right.
If your QRIS deposit is blocked or the limit shown does not match what you expect, three direct support routes are available. Each route is reachable from the Help section inside your account — no need to leave the platform to get an answer.
Open the Help menu inside your account and select Live Chat. The deposit support team can read your current QRIS limit, check whether a transaction was blocked by the daily cap or a verification gap, and confirm the next step for you. This is the fastest path for a limit dispute or a declined scan.
Your account dashboard shows the live state of your QRIS deposit limit after login. The Deposit section lists per-transaction cap, remaining daily allowance, and verification tier — all without contacting support. Start here when you want to check your limit before making a transfer.
For cases where a QRIS limit adjustment requires document review — such as a request tied to your account verification level — the email support route accepts supporting files. Access the email contact address from the Help section. Response timelines are shown on the contact page inside your account.
The limit framework applied to QRIS deposits on staek88 draws from two sources: Bank Indonesia's published QRIS merchant transaction rules and the account-tier logic built into our deposit system. Neither is invented by us — both are externally anchored, which means the ceiling you see is traceable, not arbitrary. Here is where each signal comes from.
The national QRIS transaction cap is set and published by Bank Indonesia. Our deposit flow applies that ceiling directly. When the regulatory cap changes, the figure in our deposit screen updates to match. You can cross-reference the published national limit from the Bank Indonesia website independently.
Account tier limits are tied to the identity verification steps completed on your profile. Each step — wallet name match, ID document upload, phone confirmation — is logged and visible in Account Settings. The tier ceiling applied to your QRIS deposit reflects exactly the steps that have been completed, not an opaque internal score.
We show the applicable limit on the payment screen before you confirm a QRIS scan. This is deliberate: a deposit should never fail because you didn't know the ceiling. The figure shown at entry is the figure enforced at processing — no post-scan surprises.
When your QRIS deposit is funded via GoPay or LinkAja, the source wallet's own tier limit is a factor we flag explicitly. If a deposit fails due to the source wallet's cap rather than our account limit, the error message distinguishes between the two — so you know whether to act on staek88 or in your GoPay or LinkAja app.
These definitions cover the core terms that come up when you're working with QRIS deposit limits on staek88. Each entry is a plain explanation of what the term means in practice — not a policy statement.
The per-transaction cap is the maximum rupiah amount allowed in a single QRIS scan-and-pay action. Any deposit attempt that exceeds this ceiling is rejected before the QR code is presented, keeping the transaction within the permitted range.
The daily cumulative limit is the total QRIS deposit volume your account can receive within one calendar day. Once your deposits reach that total, further QRIS transfers are paused until the daily window resets at midnight.
Account tier refers to the verification level your profile has reached. Higher tiers — achieved by completing identity and wallet-matching steps — may carry a wider QRIS deposit range. Your current tier is visible in Account Settings after login.
Wallet verification confirms that the e-wallet funding your QRIS deposit — such as GoPay or LinkAja — is registered under the same identity as your staek88 account. A matched, verified wallet is required for higher-tier QRIS limit access.
Bank Indonesia sets a national maximum for QRIS merchant transactions. This applies to all merchants accepting QRIS in Indonesia, including staek88. The applicable figure is published by Bank Indonesia and reflected in our deposit screen.
Remaining daily allowance is the portion of your daily cumulative limit that you have not yet used. It updates in real time on the deposit screen as transactions are processed, so you can see exactly how much QRIS capacity is left before the reset.
These are the questions that come up most often when you are managing QRIS deposits on staek88. Each answer points to the specific place or step where you can resolve the issue yourself, or where support can step in.
Log in to your account and open the Deposit section. The per-transaction cap and remaining daily allowance are both displayed as labelled figures above the amount entry field. No support contact is needed just to check your current limit — it updates in real time after each transaction is processed.
A rejection can come from three places: your per-transaction cap was exceeded, your daily cumulative limit was already reached, or your source wallet — GoPay or LinkAja — has its own tier cap that blocked the transfer. The error message on the deposit screen identifies which limit was crossed. Check there first before contacting support.
The per-transaction ceiling tied to the Bank Indonesia national QRIS cap cannot be changed by us or by you — it is a regulatory boundary. However, the account-tier component of your limit can widen when you complete additional verification steps. Open Account Settings to see which steps remain and follow the instructions shown there.
The staek88 account limit is the same regardless of which source wallet you use. However, GoPay and LinkAja each have their own wallet-level tier limits, which apply in addition to ours. If your GoPay or LinkAja wallet is unverified or at a basic tier, that wallet's cap may be the binding constraint on your deposit amount.
If a deposit would push your daily total over the cumulative limit, the transaction is declined before the QR code is generated. The remaining allowance shown on the deposit screen reflects exactly how much capacity is left. You can make a smaller deposit within that remaining allowance or wait for the daily window to reset.
Open the Help menu inside your account. For a quick limit check or a declined-transaction query, Live Chat is the direct route — the deposit team can read your account's current limit state. For cases that require document review tied to your verification tier, use the email contact route found in the same Help section.